ML145053 Datasheet | LANSDALE Semiconductor

.. 10-Bit A/D Converter With Serial Interface CMOS Legacy Device: Motorola MC145053 This ratiometric 10-bit ADC has a serial interface port to provide munication with MCUs and MPUs. Either a 10- or 16-bit format can be used. The16-bit format can be one continuous 16-bit stream or two intermittent 8bit streams. The converter operates from a single power supply with no external trimming required. Reference voltages down to 4.0 V are acmodated. The ML145053 has an internal clock oscillator to operate the dynamic A/D conversion sequence and an end-of-conversion (EOC) output. - - - - - - - - - - - 5 Analog Input Channels with Internal Sample-and-Hold Operating Temperature Range: TA - 40 to 125°C Successive Approximation Conversion Time: 44 µs Maximum Maximum Sample Rate: 20.4 ks/s Analog Input Range with 5-Volt Supply: 0 to 5 V Monotonic with No Missing Codes Direct Interface to Motorola SPI and National MICROWIRE™ Serial Data Ports Digital Inputs/Outputs are TTL, NMOS, and CMOS patible Low Power Consumption: 14 m W Chip plexity: 1630 Elements (FETs, Capacitors, etc.) See Application Note AN1062 for Operation with QSPI BLOCK DIAGRAM Vref MUX OUT VAG P DIP 14 = CP PLASTIC CASE 646 SOG 14 = -5P SOG CASE 751A CROSS REFERENCE/ORDERING INFORMATION MOTOROLA PACKAGE LANSDALE P DIP 14 MC145053P ML145053CP SOG 14 MC145053D ML145053-5P Note: Lansdale lead free (Pb) product, as it bees available, will be identified by a part number prefix change from ML to MLE. PIN ASSIGNMENT EOC AN0 AN1 AN2 AN3 AN4 VSS 1 2 3 4 5 6 7 14 VDD 13 SCLK 12 Din 11 Dout 10 CS 9 Vref 8 VAG 9 8 10- BIT RC DAC WITH SAMPLE AND HOLD INTERNAL TEST VOLTAGES 2 AN0 3 AN1 ANALOG 4 MUX AN2 5 AN3 6 AN4 AN5 AN6 AN7 Din 12 Dout 11 CS SCLK EOC 10 13 1 SUCCESSIVE APPROXIMATION REGISTER MUX ADDRESS REGISTER PIN 14 = VDD PIN 7 = VSS DATA REGISTER AUTO- ZEROED PARATOR DIGITAL CONTROL LOGIC MICROWIRE is a trademark of National Semiconductor Corp. Page 1 of 15 .lansdale. Issue A .. LANSDALE...